Règle ton affichage de vitesse pour qu'il s'adapte à tes roues. Voici la méthode pour les Cloudwheels, les 8 pouces et les roues de longboard.
Fine-tuning the speedometer
for your wheels
On the Switcher HP, you can adjust the remote control's wheelspeed parameter to ensure the speed display is as accurate as possible for the type of wheels installed.
Display only,
not actual speed
This setting does not change your skateboard's actual speed. It only adjusts the speed display on the remote control's LCD screen to match your wheels' diameter.
The parameter to modify is wheelspeed.
How to access
the configuration menu
1. Enter the menu
With the remote control off, press both buttons simultaneously to enter the configuration menu.
2. Line 1: Speed Unit
Change the speed scale to km/h or mph using the scroll wheel. Press the right button to move to the next setting.
3. Line 2: wheelspeed
Use the scroll wheel to set the value corresponding to your wheels. Press the left button to confirm and save.
Recommended values
by wheel type
Cloudwheels 165R (rovers)
Wheelspeed: 74
Cloudwheels 120mm
Wheelspeed: 78
8-inch all-terrain wheels
Wheelspeed: 70
6-inch wheels
Wheelspeed: 64 (original default setting)
90mm longboard wheels
Wheelspeed: 71
⚠️ Limited version (street legal)
For limited skateboards that comply with public road legislation, no modifications will be possible: access to the general menu is intentionally locked. You cannot legally modify the firmware settings.
Evo-Spirit
