Maintaining your
Evo-Spirit electric skateboard
Good habits for long-lasting rides
An electric skateboard means freedom, glide, and the joy of riding. But like all good gear, it deserves a little attention to stay in top condition. Maintaining your Evo-Spirit board means avoiding unexpected breakdowns, preserving your range, and keeping your rides smooth and powerful. And good news: with a few simple steps, you can extend the life of your board without any hassle.
Cleaning and inspection
Clean without damaging
After each ride, especially on wet, sandy or dusty ground:
- Brush the grip tape to maintain good grip under your feet.
- Use an air blower or a small brush to remove dust around the motors, belts and wheel gear.
- Forget soaked cloths or water jets: moisture and electronics do not mix well.
Doing it right after your session prevents dirt from building up.
.webp)
Check before storing
- Check the tightness of the screws (trucks, motors, casing).
- Check the condition of the deck and wheels.
- Test the free rotation of the wheels, without friction or suspicious noise.
To equip yourself easily, discover the Evo-Spirit maintenance kit: everything you need to clean, oil and pamper your board.
Transmission and wheels
Adjust belt tension
The belts ensure transmission between the motor and wheels. They must be tensioned just right:
- Too loose: risk of snapping during braking or acceleration.
- Too tight: accelerated wear, motor overheating and risk of mechanical breakage (truck axle, motor mount, etc.).
Simple test: ride at about 20 km/h and brake hard. If you hear a sharp clunk, your belt is too loose. Adjust it before your next ride.
Clean the drive gears
Drive gears often accumulate sand and dust:
- Clean them gently with a fine brush or a dry brush.
- No need for grease for the belts: the drier it is, the better it holds.
- Check that nothing is obstructing the teeth: a foreign object can cause the belt to jump.
Bearings and bushings
- Clean the bearings with a mild degreaser.
- Apply a small drop of suitable oil to maintain smoothness.
- Bushings can also be lightly greased for more comfort and less squeaking.
Winter Storage for your
Evo-Spirit Electric Skateboard
Drying and preparation
Before storing your board for winter:
- Ensure it is perfectly dry, especially the motors and bearings.
- Leave it in the open air for a few hours to allow any moisture to evaporate.
- Never leave your board in direct sunlight or in extreme cold before storage.
Stagnant water and extreme temperatures are the worst enemies of mechanics and electronics.
Long-term storage and maintenance
- Battery charged between 70% and 100% before storing, to prevent deep discharge.
- Dry and temperate place, free from moisture or frost.
- Avoid cold garages or damp basements.
- If you don't ride often, run the motors for a few minutes every 15 days, then recharge to keep the cells active.
In spring, do a complete check (screws, belts, battery, tyre pressure) and your board will be ready to hit the road again.
A little maintenance, a lot of freedom
Taking care of your Evo-Spirit electric skateboard means extending the joy of riding. A few simple steps like a quick brush, a belt check, a fast recharge, and a well-managed battery are enough to keep your board ready for every session.
At Evo-Spirit, we ride with passion and respect for our gear. A well-maintained skateboard means maximum range and more kilometres of fun.
See the boardsElectric skateboard maintenance FAQ
How do I clean my Evo-Spirit electric skateboard without damaging it?
Absolutely avoid direct water or wet cloths. Use a soft brush or an air blower to remove dust and sand around the motors, belts, and drive gear. Also, give the grip tape a brush to maintain good grip.
How often should I check the screws and mechanical components?
A quick check after each session is sufficient: verify the tightness of the screws (trucks, motors, casing), the condition of the deck, and the rotation of the wheels. This prevents vibrations and prevents breakdowns.
How do I adjust belt tension?
Test at 20 km/h: if you hear a clunk when braking hard, they are too loose. If they are too tight, the motors will overheat quickly. Adjust them so they remain flexible but without excessive play.
How do I maintain the bearings and bushings?
Clean the bearings with a mild degreaser, then add a small drop of special oil. The bushings can be slightly greased to reduce squeaking and improve ride smoothness.
What are the best practices for preserving the battery?
Never leave the battery empty for several days. Recharge it after each ride, without leaving it plugged in unnecessarily once full. For long-term storage, maintain a charge between 50 and 70% and avoid extreme temperatures.
How do I prepare my electric skateboard for winter?
Before storing it, dry it completely, especially around the motors. Store it in a dry, temperate place with the battery half-charged. In spring, do a full check before hitting the road again.
Does my riding style influence the lifespan of the electric skateboard?
Yes! Starting with a small kick, accelerating gradually, and adapting your riding mode according to the terrain reduces consumption and wear. A smooth style extends the life of your board and its components.
Where is Evo-Spirit's after-sales support located for repairs?
Evo-Spirit's after-sales support is based in France. Repairs and diagnostics are carried out in our specialised workshops to ensure quick and efficient servicing of your electric skateboard.
