Discover how Evo-Spirit ensures your electric skateboards comply with the EDPM decree for safe, legal electric mobility.
EDPM Decree:
Evo-Spirit is compliant
Riding on public roads in urban areas, according to regulations
Evo-Spirit has been a key player in electric mobility in France for years. We comply with the new EDPM (Motorized Personal Mobility Devices) decree, published on 10/25/2019. This means our electric skateboards and electric scooters finally have legal standing.
This decree is an authorization, not a restriction.
Some riders see the decree as a restriction on use, but it's actually the opposite. Electric scooters were officially banned everywhere before, even though there had been a 10-year period of tolerance.
In France today, an EDPM that is speed-limited by construction to 25 km/h can be ridden on public roads. This is subject to the conditions of the French Highway Code. You can ride on cycle paths, on roads limited to 50 km/h in urban areas, and on greenways outside urban areas. Sidewalks are never permitted. Evo-Spirit anticipated these technical constraints. We offer our skateboards in a Speed-Limited Version, compliant with decree n° 2019-1082.
What changes for your ride
Electric Scooters
All our scooters are limited to 25 km/h. They come equipped with a bell, front and rear lights, and reflectors on the sides for nighttime visibility.
Electric Skateboards
Choose from two versions. The Speed-Limited Version is capped at 25 km/h and comes with lights, reflectors, and a finger bell. The Sport Version is unrestricted and for private grounds only.
You can have both remote controls and choose which one to use depending on where you're riding.
Scooters and Motorcycles
Evo-Spirit electric scooters and motorcycles are not affected by this decree: they are already approved for public roads in the L1e-B category.
Bringing your ride into compliance
Scooters purchased before the decree
The 25 km/h speed limit is already set on all our models, so no action is needed.
- Lights: For models not equipped, we offer USB rechargeable LED lights.
- Reflectors: These are available to install on the front tube.
Skateboards purchased before the decree
- For Switcher v1 and Curve v3: speed-limited remote controls, reflectors, lights, and finger bells are available.
- Evo-LSC: These models are already limited to 25 km/h by design.
- Older models: a remote control setting isn't enough. Only a construction-based limitation to 25 km/h makes a skateboard an EDPM. Contact our workshop to see if your model can be converted.
Ready to gear up your board?
Find all the EDPM compliance gear you need right here on our site.
Check out our compliance kits