Skip to Content Black Friday: up to 300 € off our electric skateboards, until 30 November. See the deals
September 25, 2026 by
Double kingpin trucks: maintenance and adjustment for your electric skateboard
Maxime Desjardins
Evo-Spirit Xplorer V2 on the ground, TurnPro 28 double kingpin trucks

Double kingpin trucks: maintenance and adjustment

Grease, replace, tighten. Here's how to adjust your electric skateboard's double kingpin trucks, with a video tutorial to guide you.

The Article in Brief

Adjusting a double kingpin truck means working with its two nuts. Tighten the deck-side nut a bit more than the strut-side nut, and the rear nut a bit more than the front. Grease the bushings the moment your board starts to squeak. If your bushings and pivot cups are crushed or cracked, it's time to replace them. We'll walk you through all the details, complete with a helpful video.

Dial in Your Setup

Adjust your trucks to match your weight and riding style.

Keep Your Ride Smooth

Grease your bushings when you hear squeaking.

Protect Your Trucks

Replace worn bushings and pivot cups before they damage the metal.

Video tutorial

The double kingpin disassembled piece by piece

It's easy to forget about trucks until your board starts making noise. Yet, these crucial components dictate whether your skateboard carves tight turns or holds a straight line at full speed. Both the Xplorer V2 and Xplorer V2 PRO come equipped with TurnPro 28 double kingpin (DKP) trucks. With two pivot points per truck, you get an excellent balance between a tight turning radius and high-speed stability. This article expands on the video's advice, adding part references, prices, and a comprehensive FAQ.

Anatomy

Anatomy of a double kingpin truck

Evo-Spirit TurnPro 28 double kingpin truck, baseplate and axle

Two pivots instead of one

A classic truck has just one pivot point: the part that holds the wheels articulates directly on the baseplate. A double kingpin truck, however, features two pivots mounted one on top of the other. The baseplate, which is screwed under the deck, supports a truck arm that pivots once. The strut, the bar where the wheels are mounted, is attached to this arm and pivots a second time. When you lean, both pivots work together. This allows the wheels to turn more sharply. This means your board carves tighter.

Each pivot comes with its own bushings, washers, and nut. This allows for finer adjustment. Maintenance-wise, it's not much different: you'll have one extra set of bushings and one extra pivot cup compared to a classic truck, all checked at the same time.

#PartFunction
1Riser padThis shim sits between the deck and the truck, absorbing some of the impacts.
2BaseplateThe plate is screwed under the deck and supports the entire truck.
3Truck armThe first pivot point, fixed on the baseplate.
4StrutThe bar that carries the wheels, serving as the second pivot point.
5Barrel and Cone BushingsThese rubbers prevent metal-on-metal contact and allow the truck to pivot.
6Top and Bottom Cup WashersThey hold the bushings in place.
7Pivot cupsSmall cups housed in the baseplate, these are the pivot point for your trucks.
8Kingpin nutsThese adjust the truck's stiffness.
Maintenance

Double Kingpin Truck Maintenance: Grease, Then Replace

The video keeps it simple: grease and replace parts when they're due. The trick is remembering to do it.

Replacement conical and barrel bushings for TurnPro 28 truck

Bushings: grease and monitor

Is your board squeaking or making noise when you turn? Your bushings are likely dry. Grease them on the surfaces that contact the rest of the truck.

Over time, a bushing will compress, get damaged, or wear out. Once crushed, it won't return to its original shape, so it's time to replace it.

Replacement pivot cups for double kingpin truck

The pivot cup: the forgotten part

This small cup, nestled in the baseplate, supports the pivot. If it cracks or wears out, the strut will eventually rub metal on metal, leading to permanent damage.

A pivot cup only costs a few euros, while a truck costs significantly more. They're sold in kits of two, with one kit per truck. You'll need two kits for a complete board.

Adjustment

Adjusting a double kingpin truck: the two rules

Xplorer V2 rear double kingpin truck with its two motors

Your board arrives with a standard setup. Use the adjustment key included with your board to fine-tune it to your weight and riding style. No key handy? A Skate T Tool, the multi-function skate tool, also adjusts trucks. Double kingpin trucks have two nuts per truck, so you'll follow two rules for adjustment.

1. Tighten the nut on the deck side slightly more than the nut on the strut side. This helps balance the truck.

2. Tighten the rear slightly more than the front. While not an absolute rule, this setup enhances the stability of the rear truck.

Video tip: Count the turns on the thread. This gives you a reference point, so you can easily find your favorite setting again.

Loosen (to the left)Tighten (to the right)
FeelSofter truckStiffer truck
TurnsEasier carvingTurns less
High speedLess stableMore stable
Tightening limits

Too tight or too loose: when to change bushings

The bushing must always remain in contact with the nut and the cup washer. The video illustrates two common scenarios.

The bushing moves

If it no longer touches the nut or the cup washer, your truck is too loose. This can be very unstable, even dangerous. If you're looking for more flexibility, install softer bushings instead of loosening further.

The bushing is crushed

If your bushings are bulging on the sides, they're too tight. You need to switch to harder bushings. Bushings tightened beyond their intended range will deform and wear out prematurely.

The Xplorer V2 PRO comes with an additional set of soft bushings. To find the right hardness for your weight, check out our bushings and truck adjustment tutorial.

Our opinion

Double kingpin: strengths and limitations

Strengths

  • Steering and Stability: Two Pivots for Deep Carving Without Losing High-Speed Grip
  • Fine-tune your ride with two levels of adjustment, using one nut per pivot.
  • Inexpensive Wear Parts: €3.90 for pivot cups and €10 for truck bushings (prices as of 10/07/2026)

Limitations

  • Balancing two nuts means adjusting DKP trucks requires a bit more finesse than a classic truck.
  • An imprecise adjustment can quickly lead to problems: if your truck is too loose, it becomes unstable and even dangerous at high speeds.
  • Every time you adjust, make sure the bushings stay in contact with the nut and cup washer.
Key takeaways

You adjust a double kingpin with two balanced nuts and bushings that match your weight. If you're forcing the nut to get the right feel, it's time to change your bushings.

Spare parts

Spare parts for TurnPro 28 trucks

PartCompatibilityRetail price
Pivot Cups, Kit of Two for One TruckDouble kingpin trucks€3.90
Lithium Grease for Bushings and Pivot Cups, 10g TubeBushings and Pivot Cups, Evo-Spirit and Other Brands€6
Skate T Tool, Multi-Function ToolTrucks, wheels, and mounting hardware, Evo-Spirit and Most Other Brands€8
TurnPro 28 Bushings, Kit for One TruckXplorer V2, Xplorer V2 PRO€10
TurnPro 28 double kingpin truckXplorer V2, Xplorer V2 PRO€60

Prices observed on 10/07/2026. Availability changes, so contact the shop for current stock.

Help me choose

Will you adjust it yourself or come to the workshop?

At home, with the included wrench

  • Lubricating the bushings
  • Tightening and balancing the two nuts
  • Replacing Bushings and Pivot Cups

At the workshop

  • Strut or arm shows signs of metal-on-metal friction
  • Cracked truck
  • Noise persists after lubrication
FAQ

Frequently asked questions

A double kingpin (DKP) truck features two pivot points and two adjustment nuts. Evo-Spirit uses the TurnPro 28 DKP truck on the Xplorer V2 and Xplorer V2 PRO. You can change its wear parts, the bushings and pivot cups, without special tools, using the wrench that comes with your board.

Why does my electric skateboard squeak when I turn?

An electric skateboard that squeaks or creaks when turning almost always has dry bushings. On a double kingpin truck like the TurnPro 28 found on the Xplorer V2 and Xplorer V2 PRO, lubricate the bushings where they contact the rest of the truck. If the noise persists after lubrication, check the pivot cups housed in the baseplate. If they're cracked, the strut will rub metal on metal.

Should you tighten the front or rear truck more on an electric skateboard?

On an electric skateboard, tighten the rear truck slightly more than the front truck. This gives the rear a boost in stability while keeping the front agile for turning. This isn't a hard and fast rule, though; adjust it to your weight and riding style.

On a double kingpin truck, which nut should you tighten the most?

For a double kingpin truck, tighten the nut on the deck side a bit more than the nut on the strut side. This creates a better balance between the truck's two pivots. Count the threads on each nut so you can easily replicate this setting later.

What tool do you need to adjust the Xplorer V2 trucks?

The truck nuts on the Xplorer V2 adjust with the wrench included with your board. If you don't have it, a Skate T Tool, the multi-function skate tool, works just as well. Your Xplorer V2 comes with a standard setting. Loosen to the left for a softer truck that carves better, or tighten to the right for a stiffer, more stable ride at high speeds.

How can I tell if my electric skateboard trucks are too loose?

Your electric skateboard trucks are too loose when the bushing moves and no longer makes contact with the nut or the cup washer. This makes the board very unstable at high speeds, and potentially dangerous. Tighten the nut until it makes contact. If you're looking for more flexibility, install softer bushings instead of loosening the nut.

My electric skateboard trucks are still too stiff even after loosening them. What should I do?

If your trucks remain too stiff, switch to softer bushings instead of loosening the nut further. A bushing that no longer touches the nut makes the board dangerous at high speeds. The Evo-Spirit Xplorer V2 PRO comes with an extra set of soft bushings in addition to the pre-installed ones.

When should you replace the pivot cups on a double kingpin truck?

Replace the pivot cups on a double kingpin truck as soon as they crack or show wear. A damaged pivot cup lets the strut rub metal on metal, which wears out the entire truck. A kit of two pivot cups covers one truck; you'll need two kits for a complete board.

How much do TurnPro 28 truck spare parts cost?

For a TurnPro 28 double kingpin truck, a bushing kit costs €10 and a kit of two pivot cups is €3.90. A complete truck sells for €60. These are Evo-Spirit public prices observed on 10/07/2026, for the parts fitted to the Xplorer V2 and Xplorer V2 PRO.

Got a question about your setup?

Ask it in the comments under the video. If you'd prefer us to check your board, swing by the Pornichet shop at 2C avenue du Gulf Stream.

Associated Brands

Getting Started with Electric Skateboarding: Max's Tips for Learning to Ride
Stance, protective gear, braking, turning, regulations, and group rides: the complete guide for your first sessions.
Evo-Spirit
4.9/5
★★★★★
45 verified reviews