Go Street Mode with the SoftWheel Kit for Xplorer V2
This SoftWheel Street conversion kit was designed to adapt your Evo-Spirit Xplorer V2 for smooth and efficient urban use. It allows you to transform your all-terrain setup into a Street version perfectly optimized for paved surfaces.
Designed for quick and complete installation, this pack includes all the necessary components to configure your board with road-specific parts. The result: improved responsiveness, increased speed, without sacrificing the robustness and comfort of your skateboard.
Kit contents
- 4 SoftWheel 105mm wheels – for better grip and good responsiveness on the road
- 2 320mm belts – ensure transmission between motor and wheel in a Street configuration
- 2 ABEC 45T Drive Gears – compatible with SoftWheel wheels, for optimized traction
- 10 6900RS bearings – high-performance sealed bearings for smooth, durable rotation
Pack contents
SoftWheel 105mm urban wheel for electric skateboards. High-quality polyurethane, grip and comfort.
Ride comfortably on uneven urban roads
An excellent compromise between performance and comfort
SoftWheel 105 mm wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and absorbent compound effectively mitigate road imperfections (cobblestones, cracks, fine gravel). Ideal for urban longboard use, on asphalt or bike paths.
Note : Their small diameter can cause issues on very flexible boards with low ground clearance (risk of battery pack rubbing), especially on the Xplorer V2.
To help you choose the wheel or tire that best suits your riding style, consult our complete comparison of all available models.
Technical specifications
- Diameter: 105 mm
- Width: 65 mm
- Durometer: 78A
- Weight: Approximately 420 g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit for installation.
Contents
- 1 Wheel
Note: Sold individually. Adjust the quantity based on the number of wheels you need to replace.
320mm belt for electric skateboards in street configuration. Reinforced HTD 5M drive belt.
Replace your belt to optimize your board's performance
A key element for smoothness and power
The 320 mm belt is specially designed for the Xplorer V2's street configuration, equipped with Boosted 105 mm or Rubber 115 mm wheels. It ensures direct and efficient power transmission for responsive acceleration and optimal control.
A simple, yet essential replacement
Over time, belts wear out due to friction, mechanical tension, and temperature variations. Regular replacement helps maintain smooth power transmission without energy loss, preventing jerks, slips, or blockages caused by a damaged belt. It's also an economical way to protect your motors and drive gear.
Configuration
This belt is used in the following setup for the Xplorer V2:
-
Boosted 105 mm or Rubber 115 mm wheels
Compatible model
- Xplorer V2
Contents
- 1 320 mm Belt
Note: Sold individually. Adjust the quantity according to the number of wheels you need to equip. Check your wheel diameter to ensure compatibility.
ABEC 45-tooth drive gear pulley for electric skateboards. Compatible with standard ABEC core wheels.
Replace your drive gear for smooth and precise transmission
An essential component for performance
The 45T ABEC Drive Gear ensures a direct link between the motor and the wheel. By guaranteeing efficient power transmission, it maintains smooth acceleration, controlled speed, and precise response with every push.
Simple replacement, restored performance
Over time, teeth wear down due to friction. Replacing a worn drive gear helps preserve original responsiveness and power, while extending the lifespan of the transmission system.
Configuration
This drive gear is used in the following configuration on Xplorer V2:
-
SoftWheel 105 mm or Cloudwheel Rover 110 mm
-
45T Drive Gear
-
320 mm Belt
-
6900RS Bearings
Compatible model
- Xplorer V2 equipped with CloudWheel Rover 110 mm or SoftWheel 105 mm wheels
Contents
- 1 x ABEC 45T Drive Gear
Note: Sold individually. Adjust the quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
6900RS bearing for electric skateboards. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance.
An essential part of your skateboard.
The 6900RS bearing (22 x 10 x 6 mm) plays an essential role in the proper functioning of the Xplorer V2. It ensures smooth rotation, efficient power transmission, and stable riding, even in demanding conditions. Thanks to its robust construction, it limits friction between the truck axle and the wheel, which improves your board's range and durability.
Replace your bearings for an always smooth glide.
Over time, bearings are subjected to shocks, humidity, and mechanical wear. Regular replacement helps maintain the fluidity of your ride, optimize energy efficiency, and extend the lifespan of your setup. A well-maintained bearing means a more precise, faster, and always enjoyable board to ride.
Technical specifications
- Dimensions: 22 x 10 x 6 mm
- Street Configuration:
You will need 10 6900RS bearings for a complete pack.
- Configuration with CNC aluminum rims:
You will need 8 6900RS bearings + 2 6000RS bearings (for the drive gear).
Compatible model
- Xplorer V2
Contents
- 1 6900RS Bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Check your wheel diameter to ensure compatibility.
View 6000RS bearings