Switch to Street Mode with the CloudWheel Kit for Xplorer V2
This CloudWheel Street conversion kit is engineered specifically for your Xplorer V2. It lets you effortlessly swap from an all-terrain setup to a high-performance Street configuration. It is ideal for your daily road or city commutes.
This complete kit arrives ready for installation. It includes all the necessary parts to outfit your board for your urban rides. You'll immediately experience increased top speed and enhanced comfort. All this comes with rock-solid reliability.
Kit Contents
- 4 CloudWheel Rover 110 mm wheels, for superior grip and improved comfort on the road.
- 2 drive belts 320 mm. These ensure power transmission between the motor and wheels in a Street configuration.
- 2 ABEC 45T Drive Gears, compatible with CloudWheel wheels for enhanced traction.
- 10 6900RS bearings, high-performance sealed bearings for smooth, long-lasting rotation
Pack Contents
CloudWheel Rover 110mm urban wheels for electric skateboards feature an open design. This provides comfort and unique style.
For a smooth and controlled urban ride
These wheels combine comfort, grip, and versatility on all types of surfaces.
Experience maximum comfort for street riding without sacrificing performance. That's the core mission of Cloudwheel Rover 110 mm wheels. Their secret lies in patented DFC (Damping Foam Core) technology. This innovation absorbs vibrations far more effectively than traditional urethane. It guarantees you a smooth ride even on the roughest surfaces: degraded pavement, cobblestones, gravel, and uneven paths. The lugged profile and anti-slip structure ensure total grip, even on wet or dusty ground.
To help you choose the wheel or tire that best suits your ride style, check out our complete comparison of all available models.
Tech specs
- Diameter: 110 mm
- Width: 64 mm
- Durometer: 76A
- Weight: ~450g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1, V2, V3.
- Switcher HP V1, V2.
A conversion kit is required to install them.
Contents
- 4 Cloudwheel Rover 110 mm wheels
Note: Sold in packs of 4 wheels (drive gear not included).
If you want to see the version of these wheels compatible with the Cruz V2 or Curve V4, click here.
The 320mm drive belt for electric skateboards in a street configuration is a reinforced HTD 5M drive belt.
Swap out your drive belt and get your board performing like new.
A crucial component for smooth power delivery.
The 320mm drive belt is specifically designed for the Xplorer V2 street setup when equipped with 105mm Boosted or 115mm Rubber wheels. It ensures direct and efficient power transmission. This gives you responsive acceleration and optimal control.
A quick swap that makes all the difference.
Over time, drive belts naturally wear down from friction, mechanical tension, and temperature changes. Regular replacement keeps your power transmission smooth. It prevents energy loss and eliminates jerks, slips, or blockages from a damaged drive belt. It's also a smart, economical way to protect your motors and drive gear.
Configuration
This drive belt is used in the following Xplorer V2 setup:
-
105mm Boosted or 115mm Rubber wheels
Compatible Model
- Xplorer V2
Contents
- 1 x 320mm drive belt
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always double-check your wheel diameter to ensure compatibility.
Drive Gear ABEC 45-tooth pulley for electric skateboard. Compatible with standard ABEC core wheels.
Replace your drive gear for smooth, precise power transmission.
A key component for peak performance.
The 45T ABEC Drive Gear creates a direct link between the motor and the wheel. It ensures efficient power transmission. It maintains smooth acceleration, controlled speed, and precise response to every input.
Simple replacement, restored performance.
Over time, friction causes the teeth to wear down. Replacing a worn drive gear helps preserve the original responsiveness and power. It also extends the lifespan of your transmission system.
Configuration
This drive gear is used in the following Xplorer V2 configuration:
-
SoftWheel 105 mm or CloudWheel Rover 110 mm
-
45T Drive Gear
-
320 mm drive belt
-
6900RS bearings
Compatible Model
- Xplorer V2 equipped with CloudWheel Rover 110 mm or SoftWheel 105 mm wheels
Contents
- 1 ABEC 45T Drive Gear
Note: Sold individually. Adjust the quantity based on how many drive gears you need to replace. Check your wheel diameter and drive belt size to ensure compatibility.
The 6900RS bearing for electric skateboards is a sealed ball bearing designed for Evo-Spirit wheels and pulleys.
Replace your bearings to keep your board performing at its peak.
A key component of your electric skateboard.
The 6900RS bearing (22 x 10 x 6 mm) is essential for your Xplorer V2 to function correctly. It guarantees smooth rotation, efficient power transmission, and a stable ride, even in demanding conditions. Its solid construction limits friction between the truck axle and the wheel. This improves your board's range and durability.
Swap out your bearings for a consistently smooth ride.
Over time, bearings are subjected to impacts, moisture, and mechanical wear. Regular replacement helps maintain the fluidity of your ride. It optimizes energy efficiency and extends the lifespan of your setup. A well-maintained bearing means a more precise, faster, and always enjoyable board to ride.
Tech specs
- Dimensions: 22 x 10 x 6 mm
- Street Configuration:
You'll need 10 bearings 6900RS for a complete pack.
- For setups with CNC aluminum rims:
You'll need 8 x 6900RS bearings and 2 x 6000RS bearings (for the drive gear).
Compatible Model
- Xplorer V2
Contents
- 1 x 6900RS bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
See 6000RS bearings