Go Street with the CloudWheel Conversion Kit for Xplorer V1 and Switcher HP
This CloudWheel conversion kit is specifically designed for Xplorer V1 models, as well as Switcher HP V1 and V2. It lets you easily transform your all-terrain board into an ideal setup for urban use. This kit is optimized for smooth surfaces and daily commutes.
The kit arrives complete and ready to install. You'll find all the necessary parts to equip your skateboard. These parts ensure comfort and speed. They also provide grip in the city.
Pack Contents
- 4 CloudWheel Rover 110 mm wheels, for enhanced grip and improved comfort on the road
- 2 drive belts 295 mm, ensuring power transmission between the motor and wheels in a Street configuration.
- Get better traction with two CloudWheel 40T Drive Gears, designed for CloudWheel wheels.
- This set includes 8 608RS bearings without collars and 2 6003RS bearings. These high-performance flanged bearings ensure smooth, long-lasting rotation.
Pack Contents
CloudWheel Rover 110mm urban wheels for electric skateboards feature an open design for comfort and unique style.
For a smooth and controlled urban ride
These wheels combine comfort and grip, which makes them versatile on all types of surfaces.
CloudWheel Rover 110 mm wheels are made for demanding riders. Get maximum comfort without sacrificing street performance. Their patented DFC (Damping Foam Core) technology absorbs vibrations much better than classic urethane wheels. Your ride is smooth, even on degraded surfaces, cobblestones, or uneven paths. The treaded profile and anti-slip structure enhance grip, especially when the ground is wet or dusty.
To help you choose the wheel or tire that best suits your ride style, check out our complete comparison of all available models.
Tech specs
- Diameter: 110 mm
- Width: 64 mm
- Durometer: 76A
- Weight: ~450g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1, V2, V3.
- Switcher HP V1, V2.
A conversion kit is required to install them.
Contents
- 4 CloudWheel Rover 110 mm wheels
Note: Sold in packs of 4 wheels (drive gear not included).
Looking for the version of these wheels that works with the Cruz V2 or Curve V4? Click here.
This 295mm drive belt is for electric skateboards in a street setup. It's a reinforced HTD 5M transmission drive belt.
Swap out your drive belt and get your board performing like new.
A crucial component for smooth power delivery.
The 295 mm drive belt ensures a direct connection between the motor and the wheel. This provides smooth and precise energy transfer. It's essential for maintaining optimal speed, torque, and acceleration on your street setup.
A quick swap that makes all the difference.
Over time, drive belts wear out due to friction, mechanical tension, and temperature variations. Regular replacement preserves smooth power transmission without energy loss. It also prevents jerks, slips, or blockages caused by a damaged drive belt. This is an economical way to protect your motors and drive gear.
Configuration
This drive belt is designed for the Xplorer V1 and Switcher HP V1 / V2, fitting the following configuration:
-
CloudWheel or SoftWheel wheels
Compatible models
- Xplorer V1
-
Switcher HP V1 / V2
Contents
- 1 Drive Belt 295 mm
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
This CloudWheel 39-tooth Drive Gear pulley is for electric skateboards. It's compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth and responsive street setup.
Precise, adaptable drivetrain
The 40T CloudWheel Drive Gear ensures optimal power transfer from the motor to your SoftWheel or CloudWheel. It provides smooth acceleration, immediate response, and a controlled glide, even at high speeds.
Change your drive gear to maintain consistent performance.
Damaged drive gear teeth can cause torque loss, noise, or premature drive belt wear. This 39-tooth model easily restores your street configuration to its original state.
Configurations
For Switcher V1 / V2 / V3.
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
40T Drive Gear
-
Drive belts 265 mm
-
Bearings 608RS flangeless & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
40T Drive Gear
-
Drive belts 295 mm
-
Bearings 608RS flangeless & 6003RS
Compatible models
- Xplorer V1
- Switcher V1, V2, V3.
- Switcher HP V1, V2.
Contents
- 1 40T Drive Gear
Sold individually. Adjust the quantity based on how many drive gears you need. Always check your wheel diameter and drive belt size to ensure compatibility.
608RS bearing without collar for electric skateboards. Standard flanged (2RS) ball bearing.
Replace your bearings to keep your board performing at its peak.
A key component of your electric skateboard.
The 608RS flangeless bearing (22 x 8 x 6 mm) keeps your wheel and truck spinning smoothly. It's designed for many Evo-Spirit electric skateboard models. This bearing ensures efficient energy transfer and boosts stability, no matter your ride style.
Keep your ride feel dialed with regular bearing replacement.
Bearings wear down and lose efficiency over time. Replacing them regularly prevents excessive friction. This extends your board's lifespan and keeps your glide smooth, even on long rides.
Tech specs
- Dimensions: 22 x 8 x 6 mm
- Configurations:
- Switcher V1 / V2 / V3 with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1, Switcher HP V1 / V2 with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1 with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheels, or 140 mm airless wheels and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
6003RS bearing for electric skateboards. Flanged ball bearing (2RS) for Evo-Spirit wheels and pulleys.
Replace your bearings to keep your board performing at its peak.
A key component of your electric skateboard.
The 6003RS bearing (35 x 17 x 10 mm) is designed for CloudWheel or SoftWheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2, and Xplorer V1. It ensures precise axle retention. It reduces friction and improves power drivetrain between the motor and the wheel. This robust component ensures a smooth ride, even on degraded asphalt or in hard turns.
Keep your ride feel dialed with regular bearing replacement.
Bearings lose efficiency over time. They're subject to wear, moisture, and vibrations. Replacing them promptly maintains your board's glide, stability, and responsiveness. It also extends the lifespan of your drivetrain.
Tech specs
- Dimensions: 35 x 17 x 10 mm
- Configurations:
- Switcher V1, V2, V3 with CloudWheel or SoftWheel wheels
- This is compatible with the Xplorer V1, Switcher HP V1, and V2 models equipped with CloudWheel or SoftWheel wheels.
Compatible models
Xplorer V1
Switcher V1, V2, V3.
Switcher HP V1, V2.
Contents
- 1 6003RS bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.