Switch to a Street setup with the CloudWheel Conversion Kit for Switcher V1, V2, V3
This CloudWheel conversion kit for Switcher V1, V2, and V3 models transforms your all-terrain setup. It makes it perfect for city riding and smooth roads.
This complete and easy-to-install kit includes all the components you need to equip your board with parts designed for Street use. This setup delivers an excellent balance of speed, comfort, and grip. It maintains high reliability.
Pack Contents
- 4 CloudWheel Rover 110 mm wheels. They provide enhanced grip and improved comfort on the road.
- 2 drive belts 265 mm. They ensure power transmission between the motor and wheels in a Street configuration.
- 2 CloudWheel 40T Drive Gears. They are compatible with CloudWheel wheels for enhanced traction.
- 8 608RS flangeless bearings and 2 6003RS bearings. These high-performance sealed bearings provide smooth, long-lasting rotation.
Pack Contents
CloudWheel Rover 110mm urban wheels for electric skateboards have an open design for comfort and unique style.
For a smooth and controlled urban ride
These wheels combine comfort, grip, and versatility on all types of surfaces.
Cloudwheel Rover 110 mm wheels give you maximum comfort without sacrificing performance in a street setup. Their secret is patented DFC (Damping Foam Core) technology. It smooths out vibrations far better than classic urethane wheels. You'll glide smoothly, even over cobblestones, gravel, or uneven paths. The lugged profile and anti-slip structure enhance your grip, especially on wet or dusty ground.
To help you choose the wheel or tire that best suits your ride style, check out our complete comparison of all available models.
Tech specs
- Diameter: 110 mm
- Width: 64 mm
- Durometer: 76A
- Weight: ~450g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1, V2, V3.
- Switcher HP V1, V2.
A conversion kit is required to install them.
Contents
- 4 Cloudwheel Rover 110 mm wheels
Note: Sold in packs of 4 wheels (drive gear not included).
If you want to see the version of these wheels compatible with the Cruz V2 or Curve V4, click here.
This 265mm drive belt is for electric skateboards in a street configuration. It's a reinforced HTD 5M drive belt.
Swap out your drive belt and get your board performing like new.
A crucial component for smooth power delivery.
The 265mm drive belt ensures consistent energy transfer between the motor and the wheel. This is crucial for your electric skateboard's performance. These drive belts are for use with SoftWheel or CloudWheel wheels. They guarantee smooth acceleration, excellent motor response, and optimal ride comfort.
A quick swap that makes all the difference.
Drive belts lose efficiency over time due to friction, temperature fluctuations, and mechanical stress. Replacing a worn drive belt helps maintain smooth power transmission. It prevents jerks or slipping and extends the lifespan of both your motor and drive gear.
Configuration
This drive belt is used in the following setup for Switcher V1, V2, V3:
-
SoftWheel 105 mm wheels or CloudWheel Rover 110 mm
Compatible models
- Switcher V1, V2, V3.
Contents
- 1 Drive belt 265 mm
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
This CloudWheel 39-tooth Drive Gear pulley is for electric skateboards. It's compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth and responsive street setup.
Precise and adapted power transmission.
The 40T CloudWheel Drive Gear allows optimal power transfer from the motor to the SoftWheel or CloudWheel. It's designed to maintain smooth acceleration, immediate response, and a controlled ride feel, even at high speeds.
Change your drive gear to maintain consistent performance.
Damaged drive gear teeth can cause torque loss, noise, or premature drive belt wear. This 39-tooth model was designed to easily restore your street configuration to its original state.
Configurations
For Switcher V1 / V2 / V3.
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 40T
-
Drive belts 265 mm
-
Bearings 608RS flangeless & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 40T
-
Drive belts 295 mm
-
Bearings 608RS flangeless & 6003RS
Compatible models
- Xplorer V1
- Switcher V1, V2, V3.
- Switcher HP V1, V2.
Contents
- 1 Drive Gear 40T
Sold individually. Adjust the quantity based on how many drive gears you need. Always check your wheel diameter and drive belt size to ensure compatibility.
This is a 608RS flangeless bearing for electric skateboards. It is a standard sealed ball bearing.
Replace your bearings to keep your board performing at its peak.
A key component of your electric skateboard.
The 608RS flangeless bearing (22 x 8 x 6 mm) keeps your wheel and truck spinning smoothly. It's designed for many Evo-Spirit electric skateboard models. This bearing ensures efficient energy transfer. It boosts stability, no matter your ride style.
Keep your ride feel dialed with regular bearing replacement.
Bearings wear down and lose efficiency over time. Replacing them regularly prevents excessive friction. This extends your board's lifespan. It keeps your glide smooth, even on long rides.
Tech specs
- Dimensions: 22 x 8 x 6 mm
- Configurations:
- Switcher V1 / V2 / V3 with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1, Switcher HP V1 / V2 with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1 with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheels, or 140 mm airless wheels and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1, V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
This is a 6003RS bearing for electric skateboards. It is a sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearings to keep your board performing at its peak.
A key component of your electric skateboard.
The 6003RS bearing (35 x 17 x 10 mm) fits the CloudWheel or SoftWheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2, and Xplorer V1. It provides precise axle support. It reduces friction and improves power transmission between the motor and the wheel. This robust component ensures a smooth ride, even on rough asphalt or during sharp turns.
Keep your ride feel dialed with regular bearing replacement.
Bearings lose efficiency over time due to wear, humidity, and vibrations. Replacing them promptly maintains your board's glide, stability, and responsiveness. It also extends the lifespan of your drive system.
Tech specs
- Dimensions: 35 x 17 x 10 mm
- Configurations:
- Switcher V1, V2, V3 with CloudWheel or SoftWheel wheels
- Xplorer V1, Switcher HP V1, V2 with CloudWheel or SoftWheel wheels
Compatible models
Xplorer V1
Switcher V1, V2, V3.
Switcher HP V1, V2.
Contents
- 1 6003RS bearing
Note: Sold individually. Adjust the quantity based on the number of wheels you need to equip. Always check your wheel diameter to ensure compatibility.
