Switch to Street Mode with the SoftWheel Kit for Xplorer V2
This Street SoftWheel conversion kit has been designed to adapt your Xplorer V2 Evo-Spirit for smooth and efficient urban use. It allows you to transform your all-terrain setup into a Street version perfectly optimised for asphalt surfaces.
Designed for quick and complete installation, this pack includes all the necessary components to configure your board with components dedicated to road riding. The result: improved responsiveness, increased speed, without sacrificing the durability and comfort of your skate.
Kit Contents
- 4 SoftWheel 105 mm wheels – for improved grip and good responsiveness on the road
- 2 320 mm belts – ensure transmission between motor and wheel in a Street setup
- 2 ABEC 45T Drive Gears – compatible with SoftWheel wheels, for optimised traction
- 10 6900RS bearings – high-performance sealed bearings for smooth and durable rotation
Pack Contents
105mm urban SoftWheel for electric skateboard. High-quality polyurethane, grip and comfort.
Ride comfortably on uneven urban roads
An excellent compromise between performance and comfort
The 105 mm SoftWheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and absorbent rubber effectively dampen road imperfections (cobblestones, cracks, fine gravel). They are ideal for urban longboard-style use, on asphalt or cycle paths.
Note: Their small diameter can be an issue on very flexible boards with low ground clearance (risk of battery pack rubbing), especially on the Xplorer V2.
To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.
Technical Specifications
- Diameter: 105 mm
- Width: 65 mm
- Durometer: 78A
- Weight: Approximately 420 g per wheel
Compatible Modelss
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit for installation.
Contents
- 1 Wheel
Note: Sold individually. Adjust the quantity based on the number of wheels you need to replace.
320mm belt for electric skateboard in street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimise your board's performance
A key element for smoothness and power
The 320 mm belt is specifically designed for the Xplorer V2's street configuration, equipped with 105 mm Boosted wheels or 115 mm Rubber wheels. It ensures direct and efficient transmission, for responsive acceleration and optimal control.
A simple, yet essential replacement
Over time, belts are subject to wear due to friction, mechanical tension, and temperature variations. Regular replacement helps maintain smooth transmission, without energy loss, and avoids jerks, slipping, or jamming caused by a damaged belt. It is also an economical way to protect your motors and drive gear.
Configuration
This belt is used in the following setup for the Xplorer V2:
-
Boosted 105 mm or Rubber 115 mm wheels
Compatible Model
- Xplorer V2
Contents
- 1 320 mm Belt
Note: Sold individually. Adjust the quantity according to the number of wheels you need to equip. Check the diameter of your wheels to ensure compatibility.
ABEC 45-tooth Drive Gear pulley for electric skateboard. Compatible with standard ABEC core wheels.
Replace your drive gear for smooth and precise transmission
An essential component for performance
The ABEC 45T Drive Gear ensures a direct link between the motor and the wheel. By guaranteeing efficient power transmission, it helps maintain smooth acceleration, controlled speed, and precise response with every input.
Simple replacement, restored performance
Over time, teeth wear down due to friction. Replacing a worn drive gear helps maintain its original responsiveness and power, while extending the lifespan of the transmission system.
Configuration
This drive gear is used in the following configuration on Xplorer V2:
-
SoftWheel 105 mm or Cloudwheel Rover 110 mm
-
Drive Gear 45T
-
320 mm Belt
-
6900RS Bearings
Compatible Model
- Xplorer V2 equipped with CloudWheel Rover 110 mm or SoftWheel 105 mm wheels
Contents
- 1 Drive Gear ABEC 45T
Note: Sold individually. Adjust the quantity according to the number of drive gears you need to replace. Check the diameter of your wheel and the size of your belt to ensure compatibility.
6900RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your board
The 6900RS bearing (22 x 10 x 6 mm) plays an essential role in the proper functioning of the Xplorer V2. It guarantees smooth rotation, efficient power transmission, and stable riding, even in demanding conditions. Thanks to its robust construction, it limits friction between the truck axle and the wheel, which improves your board's range and durability.
Replace your bearings to keep your ride smooth
Over time, bearings are subjected to shocks, moisture, and mechanical wear. Regular replacement helps maintain the smoothness of your ride, optimise energy efficiency, and extend the lifespan of your setup. A well-maintained bearing means a more precise, faster, and always enjoyable board to ride.
Technical Specifications
- Dimensions: 22 x 10 x 6 mm
- Street Configuration:
You will need 10 6900RS bearings for a complete pack.
- Configuration with CNC aluminium rims:
You will need 8 x 6900RS bearings + 2 x 6000RS bearings (for the drive gear).
Compatible Model
- Xplorer V2
Contents
- 1 6900RS Bearing
Note: Sold individually. Adjust the quantity according to the number of wheels you need to equip. Check the diameter of your wheels to ensure compatibility.
View 6000RS bearings