Street SoftWheel Conversion Kit - Switcher V1, V2, V3
This Street SoftWheel conversion kit is specially designed for Switcher V1, V2 and V3 models, making it ideal for urban use. It converts your all-terrain setup into a smooth, high-performance Street configuration, perfectly suited for paved surfaces.
Complete and easy to install, this pack contains all the essential components to equip your board with parts designed for road riding. You'll get better responsiveness, sharper acceleration, and improved comfort, all while maintaining the strength and durability of your skateboard.
Kit Contents
- 4 SoftWheel 105mm wheels – for better grip and good responsiveness on the road
- 2 265mm belts – for power transmission between the motor and wheel in a street configuration
- 2 CloudWheel 39T Drive Gears – compatible with CloudWheel wheels, for optimised traction
- 8 608RS flangeless bearings and 2 6003RS bearings – high-performance sealed bearings for smooth and durable rotation
Pack Contents
105mm urban SoftWheel for electric skateboard. High-quality polyurethane, grip, and comfort.
Ride comfortably on uneven urban roads
An excellent balance between performance and comfort
The 105mm SoftWheel wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and shock-absorbing compound effectively dampen road imperfections (cobbles, cracks, fine gravel). Ideal for urban longboard use, on asphalt or cycle paths.
Note: Their small diameter may cause issues on very flexible boards with low ground clearance (risk of battery pack rubbing), especially on the Xplorer V2.
To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.
Technical Specifications
- Diameter: 105 mm
- Width: 65 mm
- Durometer: 78A
- Weight: Approximately 420 g per wheel
Compatible Models
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit for installation.
Contents
- 1 Wheel
Note: This kit includes a set of four wheels.
265mm belt for electric skateboard in street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimise your board's performance
A key element for smoothness and power
The 265mm belt ensures constant energy transfer between the motor and the wheel, essential for your electric skateboard's performance. Designed for use with SoftWheel or CloudWheel wheels, it guarantees progressive acceleration, good motor response, and optimal riding comfort.
A simple, yet essential replacement
Due to wear from friction, temperature variations, and mechanical stresses, belts lose efficiency. Replacing a worn belt helps maintain smooth transmission, prevent jolts or slippage, and extend the lifespan of the motor and drive gear.
Configuration
This belt is used in the following configuration for Switcher V1, V2, V3:
-
SoftWheel 105 mm or CloudWheel Rover 110 mm wheels
Compatible Models
- Switcher V1, V2, V3
Contents
- 1 265 mm Belt
Note: This kit includes the necessary components. Check your wheel diameter to ensure compatibility.
CloudWheel 39-tooth Drive Gear pulley for electric skateboard. Compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth and responsive street setup
Precise, responsive transmission
The 39T CloudWheel Drive Gear allows optimal power transfer from the motor to the SoftWheel or CloudWheel. It is designed to maintain smooth acceleration, immediate response, and a controlled glide, even at high speeds.
Change your drive gear to maintain consistent performance
Subject to wear, damaged drive gear teeth can cause torque loss, noise, or premature belt wear. This 39-tooth model is designed to easily restore your street configuration to its original condition.
Configurations
For Switcher V1 / V2 / V3
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
39T Drive Gear
-
265 mm Belts
-
608RS flangeless bearings & 6003RS bearings
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
39T Drive Gear
-
295 mm Belts
-
608RS flangeless bearings & 6003RS bearings
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 39T Drive Gear
Note: This kit includes a pair of two drive gears. Check your wheel diameter and belt size to ensure compatibility.
608RS flangeless bearing for electric skateboard. Standard sealed ball bearing.
Replace your bearing to preserve your board's performance
An essential part of your board
The 608RS flangeless bearing (22 x 8 x 6 mm) is essential for maintaining smooth rotation between the wheel and the truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Preserve your riding feel with regular replacement
Over time, bearings wear out and lose efficiency. By replacing them regularly, you avoid excessive friction, extend your board's lifespan, and maintain a smooth glide, even on long journeys.
Technical Specifications
- Dimensions: 22 x 8 x 6 mm
- Configurations:
- Switcher V1 / V2 / V3 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1, Switcher HP V1 / V2 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1 equipped with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheels or 140 mm airless wheels and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible Models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS Bearing
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
6003RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6003RS bearing (35 x 17 x 10 mm) is designed to equip CloudWheel or SoftWheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2, and Xplorer V1. It ensures precise axle retention, reduces friction, and improves power transmission between the motor and the wheel. This robust component is essential to guarantee a smooth ride, even on rough asphalt or during hard cornering.
Preserve your riding feel with regular replacement
Subject to wear, humidity, and vibrations, bearings lose efficiency over time. Replacing them promptly helps maintain your board's glide, stability, and responsiveness, while extending the lifespan of your transmission system.
Technical Specifications
- Dimensions: 35 x 17 x 10 mm
- Configurations:
- Switcher V1, V2, V3 equipped with CloudWheel or SoftWheel wheels
- Xplorer V1, Switcher HP V1, V2 equipped with CloudWheel or SoftWheel wheels
Compatible Models
Xplorer V1
Switcher V1, V2, V3
Switcher HP V1, V2
Contents
- 1 6003RS Bearing
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
