Switch to Street mode with the CloudWheel Kit for Xplorer V2
This Street CloudWheel conversion kit is specially designed for the Xplorer V2. It allows you to easily switch from an All-terrain setup to a high-performance Street setup, ideal for your road or city rides.
Complete and ready to install, this kit includes all the essential components to equip your board with parts designed for your urban rides. With this setup, you gain top speed and comfort without compromising reliability.
Kit contents
- 4 CloudWheel Rover 110 mm wheels – for improved grip and enhanced comfort on the road
- 2 x 320 mm belts – ensure transmission between motor and wheel in a Street setup
- 2 x ABEC 45T Drive Gears – compatible with CloudWheel wheels, for optimised traction
- 10 x 6900RS bearings – high-performance sealed bearings for smooth and durable rotation
Pack contents
Urban CloudWheel Rover 110mm wheels for electric skateboard. Hollow design for comfort and unique style.
For a smooth and controlled urban ride
Combines comfort, grip, and versatility on all types of surfaces
Cloudwheel Rover 110 mm wheels are designed for demanding riders seeking maximum comfort without sacrificing performance in a street setup. Thanks to their patented DFC (Damping Foam Core) technology, they absorb vibrations much more effectively than classic urethane wheels, offering a smooth ride, even on degraded surfaces, cobblestones, gravel, or uneven paths. The lugged profile and anti-slip structure enhance grip, especially on wet or dusty ground.
To help you choose the wheel or tire that best suits your riding style, consult our complete comparison of all available models.
Technical specifications
- Diameter: 110 mm
- Width: 64 mm
- Durometer: 76A
- Weight: ~450g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Requires a conversion kit for installation.
Contents
- 4 Cloudwheel Rover 110 mm wheels
Note: Sold in a pack of 4 wheels (drive gear not included)
If you want to check out the version of these wheels compatible with the Cruz V2 or Curve V4, click here.
320mm belt for electric skateboard in street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimise your board's performance
A key element for fluidity and power
The 320 mm belt is specially designed for the street configuration of the Xplorer V2 equipped with Boosted 105 mm or Rubber 115 mm wheels. It ensures direct and efficient transmission, for responsive acceleration and optimal control.
A simple, yet essential replacement
Over time, belts undergo wear due to friction, mechanical tension, and temperature variations. Regular replacement helps to maintain smooth transmission, without energy loss, and to avoid jerks, slippage, or blockages related to a damaged belt. It's also an economical way to protect your motors and drive gear.
Configuration
This belt is used in the following setup for the Xplorer V2:
-
Boosted 105 mm or Rubber 115 mm wheels
Compatible model
- Xplorer V2
Contents
- 1 x 320 mm Belt
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check the diameter of your wheels to ensure compatibility.
ABEC 45-tooth Drive Gear pulley for electric skateboard. Compatible with standard ABEC core wheels.
Replace your drive gear for smooth and precise transmission
An essential component for performance
The ABEC 45T Drive Gear ensures a direct link between the motor and the wheel. By guaranteeing efficient power transmission, it helps maintain smooth acceleration, controlled speed, and precise response with every push.
Simple replacement, restored performance
Over time, the teeth wear down due to friction. Replacing a worn drive gear helps preserve original responsiveness and power, while extending the lifespan of the transmission system.
Configuration
This drive gear is used in the following configuration on Xplorer V2:
-
SoftWheel 105 mm or Cloudwheel Rover 110 mm
-
Drive Gear 45T
-
320 mm belt
-
6900RS bearings
Compatible model
- Xplorer V2 equipped with CloudWheel Rover 110 mm or SoftWheel 105 mm wheels
Contents
- 1 Drive Gear ABEC 45T
Note: Sold individually. Adjust the quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
6900RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6900RS bearing (22 x 10 x 6 mm) plays an essential role in the proper functioning of the Xplorer V2. It guarantees smooth rotation, efficient power transmission, and stable riding, even in demanding conditions. Thanks to its robust construction, it limits friction between the truck axle and the wheel, which improves your board's range and durability.
Replace your bearings for an always smooth ride
Over time, bearings are subjected to shocks, humidity, and mechanical wear. Regular replacement allows you to maintain the fluidity of your ride, optimise energy efficiency, and extend the lifespan of your setup. A well-maintained bearing means a more precise, faster, and always enjoyable board to ride.
Technical specifications
- Dimensions: 22 x 10 x 6 mm
- Street Configuration:
Expect 10 x 6900RS bearings for a complete pack.
- Configuration with CNC aluminium rims:
Expect 8 x 6900RS bearings + 2 x 6000RS bearings (for the drive gear).
Compatible model
- Xplorer V2
Contents
- 1 x 6900RS Bearing
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check the diameter of your wheels to ensure compatibility.
View 6000RS bearings