Conversion Kit Street Wheels CloudWheel - Switcher V1, V2, V3

Passa alla Configurazione Street con il Kit CloudWheel per Switcher V1, V2, V3

Questo kit di conversione Street CloudWheel trasforma il tuo Switcher in una configurazione urbana per una guida fluida e confortevole.

Contenuto

  • 4 ruote CloudWheel
  • 4 cuscinetti
  • 2 pulegge
  • 2 cinghie

Modelli Compatibili

  • Switcher V1, V2, V3

Ruota CloudWheel Rover 110mm - Skateboard Elettrico Evo-Spirit
180,00 €
162,00 € Salva 10%
x 2

Cinghia 265mm per Skateboard Elettrico in configurazione Street
30,00 €
27,00 € Salva 10%
x 2

Pignone CloudWheel e SoftWheel 39T per Skateboard Elettrico Evo-Spirit
30,00 €
27,00 € Salva 10%
x 8

Cuscinetto 608RS (22 x 8 x 6 mm, senza flangia) - Skateboard Elettrico Evo-Spirit
32,00 €
28,80 € Salva 10%
x 2

Cuscinetto 6003RS 35 x 17 x 10 solo per Ruote CloudWheel o SoftWheel - Skateboard Elettrico
8,00 €
7,20 € Salva 10%
280,00 €
252,00 € Salva 10%
Quantità
Disponibile a breve - Prenota ora, spedizione appena disponibile

Passa alla Configurazione Street con il Kit CloudWheel per Switcher V1, V2, V3

Questo kit di conversione Street CloudWheel trasforma il tuo Switcher in una configurazione urbana ottimizzata per una guida fluida e confortevole.

Le ruote CloudWheel sono rinomate per la loro eccellente capacita di assorbimento degli urti e la loro scorrevolezza su superfici irregolari.

Contenuto

  • 4 ruote CloudWheel
  • 4 cuscinetti
  • 2 pulegge
  • 2 cinghie

Modelli Compatibili

  • Switcher V1, V2, V3

Pack content

CloudWheel Rover 110 mm wheels with DFC technology. Superior urban comfort.

For smooth and controlled urban riding

Combine comfort, grip and versatility on all surfaces

CloudWheel Rover 110 mm wheels are designed for demanding riders seeking maximum comfort without sacrificing street configuration performance. Thanks to their patented DFC (Damping Foam Core) technology, they absorb vibrations much more effectively than classic urethane wheels, offering a smooth ride even on degraded surfaces, cobblestones, gravel or irregular trails. The treaded profile and anti-slip structure enhance grip, especially on wet or dusty ground.

To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.

Technical Specifications

  • Diameter: 110 mm
  • Technology: DFC (Damping Foam Core)
  • Profile: Treaded anti-slip

Compatible Models

  • Xplorer V2, V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

265 mm street belt for Switcher V1/V2/V3 with SoftWheel or CloudWheel.

Replace your belt to optimize your board performance

A key element for smoothness and power

The 265 mm belt ensures constant energy transfer between motor and wheel, essential for your electric skateboard performance. Designed for use with SoftWheel or CloudWheel, it guarantees progressive acceleration, good motor response and optimal riding comfort.

A simple but essential replacement

With wear from friction, temperature variations and mechanical stress, belts lose efficiency. Replacing a worn belt preserves smooth transmission, prevents jerks or slipping, and extends motor and drive gear lifespan.

Configuration

This belt is used in the following configuration for Switcher V1, V2, V3:

  • SoftWheel 105 mm or CloudWheel Rover 110 mm wheels

Compatible Models

  • Switcher V1, V2, V3

Contents

  • 1 Belt 265 mm

CloudWheel 39T drive gear for Switcher, Xplorer V1, Switcher HP.

Replace your Drive Gear for a smooth and responsive street setup

Precise and adapted transmission

The 39T CloudWheel Drive Gear enables optimal power transfer from motor to SoftWheel or CloudWheel. It's designed to maintain smooth acceleration, immediate response and a controlled gliding sensation, even at high speed.

Change your drive gear to maintain consistent performance

Subject to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model was designed to easily restore your street configuration to its original state.

Configurations

For Switcher V1 / V2 / V3

  • SoftWheel 105 mm or CloudWheel 110 mm wheels

  • Drive Gear 39T

  • Belts 265 mm

  • Bearings 608RS without flange & 6003RS

For Xplorer V1 and Switcher HP V1 / V2

  • SoftWheel 105 mm or CloudWheel 110 mm wheels

  • Drive Gear 39T

  • Belts 295 mm

Compatible Models

  • Xplorer V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

Contents

  • 1 Drive Gear CloudWheel 39T

Cuscinetto 608RS senza flangia

Cuscinetto 608RS di alta qualità senza flangia per configurazioni specifiche. Offre rotolamento preciso e lunga durata.

Dimensione standard per compatibilità versatile.

Cuscinetto 608RS Senza Flangia

Cuscinetto di ricambio 608RS senza flangia per le ruote del tuo skateboard elettrico Evo-Spirit.

Specifiche

  • Tipo: 608RS senza flangia
  • Uso: Ruote skateboard elettrico

6003RS bearing (35x17x10mm) for CloudWheel/SoftWheel rims on Switcher, Xplorer V1.

Replace your bearing to preserve your board performance

An essential part of your skateboard

The 6003RS bearing (35 x 17 x 10 mm) is designed to equip CloudWheel or SoftWheel wheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It ensures precise axle support, reduces friction and improves power transmission between motor and wheel. This robust component is essential for guaranteeing smooth riding, even on degraded asphalt or in tight turns.

Preserve your sensations with regular replacement

Subject to wear, moisture and vibrations, bearings lose efficiency over sessions. Replacing them in time maintains glide, stability and responsiveness of your board while extending your transmission system lifespan.

Compatible Models

  • Xplorer V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

Contents

  • 1 Bearing 6003RS
4.7
(152)