Conversion Kit Street Wheels CloudWheel - Switcher V1, V2, V3
Switch to Street Configuration with the CloudWheel Kit for Switcher V1, V2, V3
This CloudWheel Street conversion kit is designed to transform your Switcher into an urban configuration optimized for smooth and comfortable riding.
CloudWheel wheels are known for their unique shock absorption thanks to their honeycomb structure. They offer excellent vibration damping while maintaining a dynamic and responsive ride on asphalt.
Conte
CloudWheel Rover 110mm Wheels - Urban
CloudWheel Rover 110 mm wheels with DFC technology. Superior urban comfort.
€180.00
€162.00
Save 10%
x 2
Belt 265mm - Street
265 mm street belt for Switcher V1/V2/V3 with SoftWheel or CloudWheel.
€30.00
€27.00
Save 10%
x 2
Drive Gear CloudWheel 39T
CloudWheel 39T drive gear for Switcher, Xplorer V1, Switcher HP.
€30.00
€27.00
Save 10%
x 8
Bearing 608RS Without Flange
608RS bearing without flange (22x8x6mm) for Xplorer V1, Switcher, Switcher HP.
€32.00
€28.80
Save 10%
x 2
Bearing 6003RS
6003RS bearing (35x17x10mm) for CloudWheel/SoftWheel rims on Switcher, Xplorer V1.
€8.00
€7.20
Save 10%
Passez à the configuration Street with the Kit CloudWheel for Switcher V1, V2, V3
Ce kit of conversion CloudWheel is conçu spécifiquement for the modèles Switcher V1, V2 and V3. Il transforme facilement your setup all-terrain in a version optimisée for the ville and the routes lisses.
Complet and easy to install, this kit contient tous the éléments néthesesaires for équiper your planche with of the composants adaptés à a pratique Street. Ce montage vous offers a excellent compromis entre vitesse, confort and adhérence, tout in guaranteeing a grande fiabilité.
Kit contents
- 4 wheels CloudWheel Rover 110 mm – for a meilleure accroche and a confort amélioré on route
- 2 belts 265 mm – assurent the transmission entre motor and wheel dans a configuration Street
- 2 Drive Gear CloudWheel 39T – compatibles with the wheels CloudWheel, for a traction optimisée
- 8 bearings 608RS without collerette and 2 bearings 6003RS – bearings étanches haute performance for a rotation fluide and durable
Payez plus tard
Options de paiement flexibles : 2, 3 ou 4 fois pour des montants entre 100 € et 3 500 €
Un SAV en France
Service d’entretien complet avec des techniciens qualifiés et des pièces d’origine
Pack content
CloudWheel Rover 110 mm wheels with DFC technology. Superior urban comfort.
For smooth and controlled urban riding
Combine comfort, grip and versatility on all surfaces
CloudWheel Rover 110 mm wheels are designed for demanding riders seeking maximum comfort without sacrificing street configuration performance. Thanks to their patented DFC (Damping Foam Core) technology, they absorb vibrations much more effectively than classic urethane wheels, offering a smooth ride even on degraded surfaces, cobblestones, gravel or irregular trails. The treaded profile and anti-slip structure enhance grip, especially on wet or dusty ground.
To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.
Technical Specifications
- Diameter: 110 mm
- Technology: DFC (Damping Foam Core)
- Profile: Treaded anti-slip
Compatible Models
- Xplorer V2, V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
265 mm street belt for Switcher V1/V2/V3 with SoftWheel or CloudWheel.
Replace your belt to optimize your board performance
A key element for smoothness and power
The 265 mm belt ensures constant energy transfer between motor and wheel, essential for your electric skateboard performance. Designed for use with SoftWheel or CloudWheel, it guarantees progressive acceleration, good motor response and optimal riding comfort.
A simple but essential replacement
With wear from friction, temperature variations and mechanical stress, belts lose efficiency. Replacing a worn belt preserves smooth transmission, prevents jerks or slipping, and extends motor and drive gear lifespan.
Configuration
This belt is used in the following configuration for Switcher V1, V2, V3:
-
SoftWheel 105 mm or CloudWheel Rover 110 mm wheels
Compatible Models
- Switcher V1, V2, V3
Contents
- 1 Belt 265 mm
CloudWheel 39T drive gear for Switcher, Xplorer V1, Switcher HP.
Replace your Drive Gear for a smooth and responsive street setup
Precise and adapted transmission
The 39T CloudWheel Drive Gear enables optimal power transfer from motor to SoftWheel or CloudWheel. It's designed to maintain smooth acceleration, immediate response and a controlled gliding sensation, even at high speed.
Change your drive gear to maintain consistent performance
Subject to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model was designed to easily restore your street configuration to its original state.
Configurations
For Switcher V1 / V2 / V3
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 265 mm
-
Bearings 608RS without flange & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 295 mm
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear CloudWheel 39T
608RS bearing without flange (22x8x6mm) for Xplorer V1, Switcher, Switcher HP.
Replace your bearing to preserve your board performance
An essential part of your skateboard
The 608RS bearing without flange (22 x 8 x 6 mm) is essential for maintaining smooth rotation between wheel and truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Preserve your sensations with regular replacement
Over time, bearings wear and lose efficiency. By replacing them regularly, you avoid excessive friction, extend your board lifespan and maintain smooth gliding, even on long commutes.
Technical Specifications
- Dimensions: 22 x 8 x 6 mm
- Type: 608RS without flange
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Bearing 608RS without flange
6003RS bearing (35x17x10mm) for CloudWheel/SoftWheel rims on Switcher, Xplorer V1.
Replace your bearing to preserve your board performance
An essential part of your skateboard
The 6003RS bearing (35 x 17 x 10 mm) is designed to equip CloudWheel or SoftWheel wheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It ensures precise axle support, reduces friction and improves power transmission between motor and wheel. This robust component is essential for guaranteeing smooth riding, even on degraded asphalt or in tight turns.
Preserve your sensations with regular replacement
Subject to wear, moisture and vibrations, bearings lose efficiency over sessions. Replacing them in time maintains glide, stability and responsiveness of your board while extending your transmission system lifespan.
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Bearing 6003RS
Switch to Street Configuration with the CloudWheel Kit for Switcher V1, V2, V3
This CloudWheel Street conversion kit is designed to transform your Switcher into an urban configuration optimized for smooth and comfortable riding.
CloudWheel wheels are known for their unique shock absorption thanks to their honeycomb structure. They offer excellent vibration damping while maintaining a dynamic and responsive ride on asphalt.