Conversion Kit Street Wheels Urethane 90 - Xplorer V1, Switcher HP
Optimize Your Urban Ride with the 90mm Urethane Kit
This 90mm urethane wheels conversion kit is compatible with Xplorer V1 and Switcher HP. It allows you to convert your board to a Street configuration optimized for urban riding.
The 90mm urethane wheels offer a perfect balance between speed and comfort. Their compact size provides lively and responsive riding, ideal for carving and city commutes.
Contents
x 4
90mm Red Urethane Wheel - Urban
90 mm red urethane wheel for urban cruising. Smooth glide, responsive acceleration.
€60.00
€54.00
Save 10%
x 2
Belt 285mm - Street
285 mm street belt for Xplorer V1, Switcher HP with 90 mm urethane wheels.
€30.00
€27.00
Save 10%
x 2
Drive Gear 35T - Longboard Wheel
35T drive gear for 90 mm urethane longboard wheels.
€30.00
€27.00
Save 10%
x 6
Bearing 608RS Without Flange
608RS bearing without flange (22x8x6mm) for Xplorer V1, Switcher, Switcher HP.
€24.00
€21.60
Save 10%
x 2
Bearing 608RS with Flange
608RS bearing with flange (22x8x6mm) for 90mm urethane wheel setups.
€8.00
€7.20
Save 10%
Une performance optimale for vos trajets urbains
Optez for a configuration Street high-performancee with this kit équipé of wheels in urethane rouge of 90 mm, spécialement adapté aux modèles Xplorer V1, Switcher HP V1 and V2. Parfaites for the cruising and the déplacements quotidiens, these wheels allient réactivité and longévité.
Elles délivrent a couple puissant dès the départ, facilitant l’accélération, and offersnt a relance dynamique après chaque virage. De plus, elles contribuent à maximiser l’autonomie of your skateboard, for of the sessions plus longues and agréables.
Kit contents
- 4 wheels urethane rouges 90 mm – offersnt a glisse fluide, of the accélérations réactives and bonne autonomie
- 2 belts 285 mm – assurent the transmission entre motor and wheel dans a configuration Street
- 2 Drive Gear 35T – compatibles with the wheels CloudWheel, for a traction optimisée
- 6 bearings 608RS without collerette and 2 bearings 608RS with collerette – bearings étanches haute performance for a rotation fluide and durable
Payez plus tard
Options de paiement flexibles : 2, 3 ou 4 fois pour des montants entre 100 € et 3 500 €
Un SAV en France
Service d’entretien complet avec des techniciens qualifiés et des pièces d’origine
Pack content
90 mm red urethane wheel for urban cruising. Smooth glide, responsive acceleration.
A lightweight and efficient wheel for urban cruising
Smooth glide, responsive acceleration and optimal range
Designed for cruising and daily commutes, the 90 mm red urethane wheel combines responsiveness, comfort and durability. They guarantee good grip and smooth riding sensations.
This wheel ensures high torque at startup, good re-acceleration out of turns, and helps optimize your board's range.
To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.
Technical Specifications
- Diameter: 90 mm
- Durometer: 78A
- Core: ABEC standard
- Color: Red
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Urethane wheel 90 mm (sold individually)
285 mm street belt for Xplorer V1, Switcher HP with 90 mm urethane wheels.
Replace your belt to optimize your board performance
An essential element for a smooth and responsive ride
The 285 mm belt ensures the link between motor and 90 mm urethane wheel, guaranteeing regular and loss-free energy transfer.
A simple but essential replacement
Subject to friction and tension variations, a belt can wear or lose efficiency over rides. Replacing it preserves performance and prevents slipping.
Configuration
This belt is used in the following configuration for Xplorer V1 and Switcher HP V1, V2:
-
90 mm urethane wheels
Compatible Models
- Xplorer V1
-
Switcher HP V1 / V2
Contents
- 1 Belt 285 mm
Note: Sold individually. Adjust quantity based on wheels to equip.
35T drive gear for 90 mm urethane longboard wheels.
Replace your Drive Gear to keep a smooth and responsive street setup
An essential component for performance
The 35T Drive Gear ensures fast and direct energy transfer between motor and 90 mm urethane wheel, providing smooth acceleration and controlled speed.
Replace drive gear to optimize performance
With natural wear from friction, damaged drive gear teeth can cause torque loss, noise or premature belt wear.
Configurations
For Switcher V1 / V2 / V3
-
90 mm urethane wheels
-
Drive Gear 35T
-
Belts 250 mm
-
Bearings 608RS without flange & with flange
For Switcher HP V1 / V2 and Xplorer V1
-
90 mm urethane wheels
-
Drive Gear 35T
-
Belts 285 mm
-
Bearings 608RS without flange & with flange
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear 35T
608RS bearing without flange (22x8x6mm) for Xplorer V1, Switcher, Switcher HP.
Replace your bearing to preserve your board performance
An essential part of your skateboard
The 608RS bearing without flange (22 x 8 x 6 mm) is essential for maintaining smooth rotation between wheel and truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Preserve your sensations with regular replacement
Over time, bearings wear and lose efficiency. By replacing them regularly, you avoid excessive friction, extend your board lifespan and maintain smooth gliding, even on long commutes.
Technical Specifications
- Dimensions: 22 x 8 x 6 mm
- Type: 608RS without flange
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Bearing 608RS without flange
608RS bearing with flange (22x8x6mm) for 90mm urethane wheel setups.
Replace your bearing to preserve your board performance
An essential part of your electric skateboard
The 608RS bearing with flange (22 x 8 x 6 mm) is specifically designed for street configurations with 90 mm urethane wheels on Xplorer V1, Switcher V1 / V2 / V3 and Switcher HP V1 / V2 models. Thanks to its integrated flange, it ensures optimal bearing fit (installed on the drive gear side) and smooth rotation, essential for guaranteeing your electric skateboard performance.
Preserve your sensations with regular replacement
During rides, bearings can be subject to mechanical stress, vibrations and moisture infiltration. Replacing worn bearings restores efficient, quiet gliding and optimized range, while protecting other transmission components.
Compatible Models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Bearing 608RS with flange
Optimize Your Urban Ride with the 90mm Urethane Kit
This 90mm urethane wheels conversion kit is compatible with Xplorer V1 and Switcher HP. It allows you to convert your board to a Street configuration optimized for urban riding.
The 90mm urethane wheels offer a perfect balance between speed and comfort. Their compact size provides lively and responsive riding, ideal for carving and city commutes.