Conversion Kit Street Wheels SoftWheel - Switcher V1, V2, V3

Switch to Street Configuration with the SoftWheel Kit for Switcher V1, V2, V3

This SoftWheel Street conversion kit transforms your Switcher into an urban configuration perfect for daily use.

The SoftWheel polyurethane wheels offer a smooth and stable ride on asphalt, with excellent grip and optimal durability. Their soft compound absorbs small road imperfections for enhanced comfort.

Contents

  • 4 SoftWheel polyure
x 4

SoftWheel 105mm Wheel - Urban
€100.00
€90.00 Save 10%
x 2

265mm Belt for Electric Skateboard in Street Configuration
€30.00
€27.00 Save 10%
x 2

Drive Gear CloudWheel and SoftWheel 39T for Evo-Spirit Electric Skateboard
€30.00
€27.00 Save 10%
x 8

608RS Bearing (22 x 8 x 6 mm, without flange) - Evo-Spirit Electric Skateboard
€32.00
€28.80 Save 10%
x 2

6003RS Bearing 35 x 17 x 10 only for CloudWheel or SoftWheel - Electric Skateboard
€8.00
€7.20 Save 10%
€200.00
€180.00 Save 10%
Quantity
Available soon - Reserve now, shipped as soon as available

Kit of Conversion Street Wheels SoftWheel - Switcher V1, V2, V3

This kit of conversion Street SoftWheel is spécialement designed for the modèles Switcher V1, V2 and V3, offering a adaptation optimale à a usage urbain. Il convertit your setup all-terrain in a configuration Street fluide, high-performancee and adaptée aux surfathese bitumées.

Complet and easy to install, ce pack contient tous the composants indispensables for équiper your planche with of the pièthese pensées for the conduite on route. Vous bénéficiez ainsi d’une meilleure réactivité, d’une accélération plus vive and d’un meilleur confort, tout in conservant the solidité and the durabilité of your skateboard.

Kit contents

  • 4 wheels SoftWheel 105mm – for a meilleure accroche and a bonne réactivité on route
  • 2 belts 265mm – assurent the transmission entre motor and wheel dans a configuration street
  • 2 Drive Gear CloudWheel 39T – compatibles with the wheels CloudWheel, for a traction optimisée
  • 8 bearings 608RS without collerette and 2 bearings 6003RS – bearings étanches haute performance for a rotation fluide and durable

Livraison rapide

Profitez d’une livraison rapide en Europe

Plus d'infos

Payez plus tard

Options de paiement flexibles : 2, 3 ou 4 fois pour des montants entre 100 € et 3 500 €

Plus d'infos

Un SAV en France

Service d’entretien complet avec des techniciens qualifiés et des pièces d’origine

Plus d'infos

Besoin d’un conseil ?

Contactez notre équipe par email pour toute assistance

Contactez-nous

Pack content

SoftWheel 105 mm urban wheels. Comfortable alternative to urethane.

Ride comfortably on irregular urban roads

An excellent compromise between performance and comfort

SoftWheel 105 mm wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and absorbent rubber effectively dampen road imperfections (cobblestones, cracks, fine gravel). Ideal for urban longboard use, on asphalt or bike paths.

Note: Their small diameter may cause issues on very flexible boards with low ground clearance (risk of battery pack rubbing), especially on the Xplorer V2.

To help you choose the wheel or tire that best suits your riding style, check out our complete comparison of all available models.

Technical Specifications

  • Diameter: 105 mm
  • Type: SoftWheel

Compatible Models

  • Xplorer V2, V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

265 mm street belt for Switcher V1/V2/V3 with SoftWheel or CloudWheel.

Replace your belt to optimize your board performance

A key element for smoothness and power

The 265 mm belt ensures constant energy transfer between motor and wheel, essential for your electric skateboard performance. Designed for use with SoftWheel or CloudWheel, it guarantees progressive acceleration, good motor response and optimal riding comfort.

A simple but essential replacement

With wear from friction, temperature variations and mechanical stress, belts lose efficiency. Replacing a worn belt preserves smooth transmission, prevents jerks or slipping, and extends motor and drive gear lifespan.

Configuration

This belt is used in the following configuration for Switcher V1, V2, V3:

  • SoftWheel 105 mm or CloudWheel Rover 110 mm wheels

Compatible Models

  • Switcher V1, V2, V3

Contents

  • 1 Belt 265 mm

CloudWheel 39T drive gear for Switcher, Xplorer V1, Switcher HP.

Replace your Drive Gear for a smooth and responsive street setup

Precise and adapted transmission

The 39T CloudWheel Drive Gear enables optimal power transfer from motor to SoftWheel or CloudWheel. It's designed to maintain smooth acceleration, immediate response and a controlled gliding sensation, even at high speed.

Change your drive gear to maintain consistent performance

Subject to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model was designed to easily restore your street configuration to its original state.

Configurations

For Switcher V1 / V2 / V3

  • SoftWheel 105 mm or CloudWheel 110 mm wheels

  • Drive Gear 39T

  • Belts 265 mm

  • Bearings 608RS without flange & 6003RS

For Xplorer V1 and Switcher HP V1 / V2

  • SoftWheel 105 mm or CloudWheel 110 mm wheels

  • Drive Gear 39T

  • Belts 295 mm

Compatible Models

  • Xplorer V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

Contents

  • 1 Drive Gear CloudWheel 39T

608RS bearing without flange (22x8x6mm) for Xplorer V1, Switcher, Switcher HP.

Replace your bearing to preserve your board performance

An essential part of your skateboard

The 608RS bearing without flange (22 x 8 x 6 mm) is essential for maintaining smooth rotation between wheel and truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.

Preserve your sensations with regular replacement

Over time, bearings wear and lose efficiency. By replacing them regularly, you avoid excessive friction, extend your board lifespan and maintain smooth gliding, even on long commutes.

Technical Specifications

  • Dimensions: 22 x 8 x 6 mm
  • Type: 608RS without flange

Compatible Models

  • Xplorer V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

Contents

  • 1 Bearing 608RS without flange

6003RS bearing (35x17x10mm) for CloudWheel/SoftWheel rims on Switcher, Xplorer V1.

Replace your bearing to preserve your board performance

An essential part of your skateboard

The 6003RS bearing (35 x 17 x 10 mm) is designed to equip CloudWheel or SoftWheel wheel rims on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It ensures precise axle support, reduces friction and improves power transmission between motor and wheel. This robust component is essential for guaranteeing smooth riding, even on degraded asphalt or in tight turns.

Preserve your sensations with regular replacement

Subject to wear, moisture and vibrations, bearings lose efficiency over sessions. Replacing them in time maintains glide, stability and responsiveness of your board while extending your transmission system lifespan.

Compatible Models

  • Xplorer V1
  • Switcher V1, V2, V3
  • Switcher HP V1, V2

Contents

  • 1 Bearing 6003RS